Kingston KVR26N19S8/16 16GB DDR4 2666Mhz DIMM Memory
- This document describes ValueRAM's KVR26N19S8/16 is a 2G x 64-bit (16GB) DDR4-2666 CL19 SDRAM (Synchronous DRAM), 1Rx8, memory module, based on eight 2G x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4-2666 timing of 19-19-19 at 1.2V. Each 288-pin DIMM uses gold contact fingers. The electrical and mechanical specifications are as follows:
ā¢ Power Supply: VDD = 1.2V Typical
ā¢ VDDQ = 1.2V Typical
ā¢ VPP = 2.5V Typical
ā¢ VDDSPD = 2.2V to 3.6V
ā¢ Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals
ā¢ Low-power auto self refresh (LPASR)
ā¢ Data bus inversion (DBI) for data bus
ā¢ On-die VREFDQ generation and calibration
ā¢ Single-rank
ā¢ On-board I2 serial presence-detect (SPD) EEPROM
ā¢ 16 internal banks; 4 groups of 4 banks each
ā¢ Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS)
ā¢ Selectable BC4 or BL8 on-the-fly (OTF)
ā¢ Fly-by topology
ā¢ Terminated control command and address bus
ā¢ PCB: Height 1.23ā (31.25mm)
ā¢ RoHS Compliant and Halogen-Free
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Kingston KVR26N19S8/16 16GB DDR4 2666Mhz DIMM Memory
Kingston KVR26N19S8/16 16GB DDR4 2666Mhz DIMM Memory
- This document describes ValueRAM's KVR26N19S8/16 is a 2G x 64-bit (16GB) DDR4-2666 CL19 SDRAM (Synchronous DRAM), 1Rx8, memory module, based on eight 2G x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4-2666 timing of 19-19-19 at 1.2V. Each 288-pin DIMM uses gold contact fingers. The electrical and mechanical specifications are as follows:
ā¢ Power Supply: VDD = 1.2V Typical
ā¢ VDDQ = 1.2V Typical
ā¢ VPP = 2.5V Typical
ā¢ VDDSPD = 2.2V to 3.6V
ā¢ Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals
ā¢ Low-power auto self refresh (LPASR)
ā¢ Data bus inversion (DBI) for data bus
ā¢ On-die VREFDQ generation and calibration
ā¢ Single-rank
ā¢ On-board I2 serial presence-detect (SPD) EEPROM
ā¢ 16 internal banks; 4 groups of 4 banks each
ā¢ Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS)
ā¢ Selectable BC4 or BL8 on-the-fly (OTF)
ā¢ Fly-by topology
ā¢ Terminated control command and address bus
ā¢ PCB: Height 1.23ā (31.25mm)
ā¢ RoHS Compliant and Halogen-Free
Original: $34.97
-70%$34.97
$10.49Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
- This document describes ValueRAM's KVR26N19S8/16 is a 2G x 64-bit (16GB) DDR4-2666 CL19 SDRAM (Synchronous DRAM), 1Rx8, memory module, based on eight 2G x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4-2666 timing of 19-19-19 at 1.2V. Each 288-pin DIMM uses gold contact fingers. The electrical and mechanical specifications are as follows:
ā¢ Power Supply: VDD = 1.2V Typical
ā¢ VDDQ = 1.2V Typical
ā¢ VPP = 2.5V Typical
ā¢ VDDSPD = 2.2V to 3.6V
ā¢ Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals
ā¢ Low-power auto self refresh (LPASR)
ā¢ Data bus inversion (DBI) for data bus
ā¢ On-die VREFDQ generation and calibration
ā¢ Single-rank
ā¢ On-board I2 serial presence-detect (SPD) EEPROM
ā¢ 16 internal banks; 4 groups of 4 banks each
ā¢ Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS)
ā¢ Selectable BC4 or BL8 on-the-fly (OTF)
ā¢ Fly-by topology
ā¢ Terminated control command and address bus
ā¢ PCB: Height 1.23ā (31.25mm)
ā¢ RoHS Compliant and Halogen-Free
